Solar, Wind, & Generator Products


 DTC10-DC


 The DTC-10 is a Differential Temperature Controller that
 monitors up to 4 sensors. It controls a Laing
 circulating pump.

DTC10-DC
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 GSCM


 The GSCM is a fully programmable micro-processor
 generator start controller. It accepts auto or manual
 commands & monitors multiple start/stop fault conditions

GSCM
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat
 Application Bulletin  GSCM Alternator 255HZ Version
 Application Bulletin  Outback Inverter Auto Generator Start Using GSCM
 Application Bulletin  The GSCM-255 Hz looks for a 0 - 255 Hz signal with AC voltages between 25 & 240 VAC
 Application Bulletin  GSCM - Outback Inverter with Kubota GL6500 Generator
 Application Bulletin  GSCM - Outback Inverter with Honda EU3000Is Generator
 Application Bulletin  GSCM mini - Outback Inverter with Honda EM7000is Generator
 Application Bulletin  GSCM mini - Outback Inverter with Honda EU3000Is Generator
 Application Bulletin  Outback Inverter with Generator Requiring Higher Current Relays
 Application Bulletin  GSCM mini - Outback Inverter with Honda EB6500 Generator
 Application Bulletin  GSCM Shutdown On High/Low HZ Fault Condition
 Application Bulletin  GSCM - 48 Volt Battery System with Hand/Off/Auto switch
 Application Bulletin  Outback Inverter with Winco 6500 Generator Wiring Diagram
 Application Bulletin  Outback Inverter with Briggs and Stratton Elite Series Generator

 GSCM-mini-d


 The GSCM-mini is an inexpensive, fixed programmable
 generator start controller. It supports three types of
 2 to 3 wire generator control for 3600 RPM hi speed gen.

GSCM-mini-d
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 GSCM-mini-i


 The GSCM-mini is an inexpensive, fixed programmable
 generator start controller. It supports three types of
 2 to 3 wire generator control for 3600 RPM hi speed gen.

GSCM-mini-i
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 LF-10VW1


 The LF-10VW1-02, AC Line filter multi stage.
  Used in conjunction with GSCM & GSCM-mini
  to filter the AC feed back signal from a generator.

LF-10VW1
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 LF-851-02


 The LF-851-02, AC Line filter singel stage.
  Used in conjunction with GSCM & GSCM-mini
  to filter the AC feed back signal from a generator.

LF-851-02
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVCM10


 The PVCM10 is a 10A Photo-Voltaic Controller Module, it
 connects between the PV panel and 12VDC storage Battery
 regulates the charge, to avoid over charging of Battery.

PVCM10
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVCM25


 The PVCM25 is a 25A Photo-Voltaic Controller Module, it
 connects between the PV panel and 12V DC storage Battery
 regulates the charge to avoid over charging of Battery

PVCM25
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVCM25D


 The PVCM25D is a 25A Photo-Voltaic charge Controller
 Module that connects between the PV panel and the
 12/24V DC storage Batteries w/ PVDM com jack option.

PVCM25D
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVCM25D- KIT WITH DI


 The PVCM40D- KIT consists of the PVDM4-LC display the
 PVCM40D controller Cat 5 patch cable & operators manual
 Displays four readings - battery voltage - solar charge

PVCM25D-
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVCM40D


 The PVCM40D is a 40A Photo-Voltaic charge controller
 module that connects between the PV panel and the
 12/24V DC storage batteries w/ PVDM com jack option

PVCM40D
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVDM4-LC


 The PVDM4-LC is a remote mounted display unit for the
 PVCM20D charge controller module. Displays four readings
 battery voltage - % remaining - Solar charge Amps- Accum

PVDM4-LC
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVDM6


 The PVDM6 is a remote mounted display unit for the
 PVCM40D charge controller module. Displays six readings
 battery voltage-% remaining-solar charge & load Amps.

PVDM6
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVDM6-KIT


 The PVDM6 KIT consists of the PVDM6 display the PVDAM
 24-48 volt adapter Cat 5 patch cable & operators manual.
 Displays six readings - battery voltage - solar charge.

PVDM6-KIT
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVDM6-LC


 The PVDM6-LC is a remote mounted display unit for the
 PVCM20D charge controller module. Displays six readings
 battery voltage -% remaining - solar charge & load Amps.

PVDM6-LC
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLC-15


 The PVLC-15 is a 15A Photo-Voltaic & Lighting Controller
 Module. It connects between the PV panel and 12/24V DC
 storage batteries and lighting load.

PVLC-15
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLC-15MD


 The PVLC-15MD is a 15A PV & Lighting Controller
 Module. It connects between the PV panel and 12/24V DC
 storage batteries and lighting load with motion detect.

PVLC-15MD
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLC-40


 The PVLC-40 is a 40A Photo-Voltaic & Lighting Controller
 Module. It connects between the PV panel and 12/24V DC
 storage batteries and lighting load.

PVLC-40
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLC-40MD


 The PVLC-40MD is a 40A PV & Lighting Controller
 Module. It connects between the PV panel and 12/24V DC
 storage batteries and lighting load with motion detect.

PVLC-40MD
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLVD-15


 The PVLVD-15 a 15A Photo-Voltaic/Low Voltage Disconnect
 Control Module. It connects between the PV panel -12/24V
  DC storage batteries and the load device.

PVLVD-15
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PVLVD-40


 The PVLVD-40 a 40A Photo-Voltaic/Low Voltage Disconnect
 Control Module. It connects between the PV panel -12/24V
  DC storage batteries and the load device.

PVLVD-40
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PVWDM


 The PVWDM is a remote mounted display unit for 12-72VDC
 wind generator systems. Displays six readings- battery
 voltage - % remaining - Wind charge Amps - Load Amps

PVWDM
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 PVWSM


 The PVWSM serves as a switching power supply and shunt
 module for the PVWDM display unit for 12-72V solar/wind
 systems. Contains two 40 Amp shunts.

PVWSM
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 SRS


 The SRS-1VWM is a simple PV cell that accurately tracks
 solar radiance. 0 - 100% is ranged over the 0 - 1 Volt
 output. 100% occurs at a solar radiance of 1000 W/m^2.

SRS
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 VRDC


 The VRDC is an adjustable 24VDC Voltage Relay module,
 designed for applications where a varying 0-20mA/0-5V is
 used to switch an adj. relay as in generator control.

VRDC
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 VRDC-200V


 The VRDC-200V is a 12VDC 15Amp adjustable relay module
 designed for applications where a varying 200VDC voltage
 is used to switch a power relay as in generator control.

VRDC-200V
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 VRDC-40A


 The VRDC-40A is a 40 Amp adjustable DC Voltage Relay
 module for applications where a varying DC voltage is
 used to switch an adj. relay as in generator control.

VRDC-40A
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

Training

Our Training
We offer a wide range of HVAC Product and System Operations training courses throughout the year.

View Training

Service

Services we provide
Technical service and repair parts for any phase of your building´s lifecycle.

View all Services

Featured Demo

Our Main Office
Take a look at what we've done to reduce our building energy by almost 50% over its historical average.

View Demo
Atkinson Electronics, Inc.
14 West Vine Street
Salt Lake City, Utah 84107
Tel: 801-261-3600
Fax: 801-261-3796
Toll free: (800) 261-3602
About Us|Contact Info|Site Map

Atkinson Electronics, Inc. © Copyright 2001 - 2010 All Rights Reserved