All Discontinued Non-OEM Products


 20A-Relay


 The 20A-Relay used in conjunction GSCM &
  GSCM-mini to protect the 10 Amp rated contacts
  for the loads greater than 10 Amps.

20A-Relay
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 AD590


 The AD590-D is a two wire linear temperature sensor
 that produces a linear current output 1uA/K. The AD590-D
 comes with the duct mounting.

AD590
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 ALIC


 The ALIC is software package that controls up to 40
 irrigation zones. Reduced Features.
 using Tridiums r2.301.515 platform.

ALIC
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat
 White Paper  Integration of Landscape Irrigation with Building Automation - White Paper
 Instructions  Tridium Irrigation Interface - Screen shots and Instructions

 ASM2


 The ASM2 is designed as a Staefa phase cut signal
 converter module for interfacing 0 to 5V or 0 to 10V
 DC input devices.

ASM2
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 AVR4A


 The AVR4A is a 4 ch. Adjustable Voltage / Current Relay.
 It was desinged to provide adjustable trip on/off points
 for 4 SPDT Relays rated for 1O Amps 120VAC.

AVR4A
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 AVR4C


 The AVR4C is a 2 ch. Adjustable Voltage / Current Relay.
 It was desinged to provide adjustable trip on/off points
 for 2 SPDT Relays rated for 12 Amps 120VAC.

AVR4C
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 DCIM-PCD


 The DCIM-PCD is designed for converting 0 to 10VDC or
 4 to 20mA signals to a Staefa phase cut signal for
 driving magnetic valves and damper actuators.

DCIM-PCD
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 DCIM-SC


 The DCIM-SC is designed for conditioning or converting
 0 to 10V, 4 to 20mA, or Staefa phase cut signal to
 a standard 0 to 10V or 4 to 20mA signal.

DCIM-SC
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 Di16CIB


  Di16CIB is a 16 channel isolation board that accepts 24
  volt AC or DC signals and provides an open collector
  output. Great for Data acquisition applications.

Di16CIB
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 DIM2


 The DIM2 is a 3 1/2 digit LCD panel meter, consisting of
 Acculex DP-652 meter and a sub-board for input signal
 scaling for various signal and sensors types.

DIM2
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 DIM2-RSP


 The DIM2-RSP is a 3 1/2 digit LCD panel meter with
 remote set-point potentiometer. A push button allows
 set-point value to be viewed.

DIM2-RSP
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 DIM3


 The DIM3 is a 3 1/2 digit LED panel meter, consisting of
 Datels DMS-30LED meter and a sub-board for input signal
 scaling for various signal and sensors types.

DIM3
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 IPS


 The IPS is a multi channel isolation AC/DC power supply
 designed to provide isolated 24VAC and adjustable DC
 voltages for powering peripheral devices. 24V or 120VAC.

IPS
No Optical Isolation Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 IPXFMR


 The IPXFMR is a multi channel isolation AC power supply
 designed to provide isolated 24VAC for powering
 peripheral devices. 24V or 120VAC.

IPXFMR
Optical Isolation Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 MASC


 The MASC is a four channel custom analog signal scaling
 module, each channel is factory customized to meet input
 and output specifications. (ASM1 singal channel version)

MASC
No Optical Isolation Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 MODCON1


 The MODCON1 is a moden controller module that connects a
 personal computer and modem with a Staefa System One
 field-controller. Modem provides control for the MODCON1

MODCON1
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 MRB1


 The MRB1 is a AC to DC interface for Staefa DCRB
 relay board, that connects between the SM2 controller
 digital AC outputs and the DCRM relay output board.

MRB1
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PACM


 The PACM is a Programed Analog Control Module, that
 converts Staefa SM2-SVP velocity & temperature signals
 provides linear 0-5V DC analog voltage outputs.(see PDF)

PACM
No Optical Isolation Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PCPT


 The PC/PT is a Phase Cut/Pneumatic Transducer consisting
 of a Pneutronics VIP transducer and a PC sub module.
 Being replaced by UIPT - Universal input to Pneumatic

PCPT
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PLFT24


 The PLFT-24 connects LONWORKS twisted pair networks
 to LONWORKS 24VAC power line networks.
 All LONWORKS router functions are supported.

PLFT24
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PMR4


 The PMR4 is a PWM input to 4 SPDT relay output stages.
 It was desinged to provide additional capabilities for
 Deltas DNT & DAC Bacstat II controllers.

PMR4
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 PSIM


 The PSIM was designed to interface Phoenix Controls MAC
 panels to Staefas SM2 DDC, FNC, or MUX controllers. It
 mounts on the SM2 controller card. Cables included.

PSIM
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 RCM4


 The RCM4 is a 24V power line communication, four
 relay output LON node. Applications include two position
 control of pumps, fans, valves and sprinkler valve boxes

RCM4
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat
 White Paper  Integration of Landscape Irrigation with Building Automation - White Paper

 RH-LCD


 The RH-LCD is a Staefa Room Housing with LCD digital
 display. It was designed to accept a voltage signal and
 display output range of 0 to 999 for RH sensors, etc.

RH-LCD
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 ROSM


 The Room Offset Switching Module is a door activated
 room offset module designed to provide an additional
 level of containment in constant volume laboratories.

ROSM
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 RS-2101D


 The SM2-RS2101D is a Staefa SM2 DDC Room Sensor with a
 LCD digital display. It was designed to provide a visual
 display of the room temperature, Std. options Available.

RS-2101D
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 RS-DCP


 The RS-DCP is a Staefa Room sensor with dual sensors and
 communication ports.It provides access to two Staefa SM2
 controllers that share the same zone or sensing point.

RS-DCP
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 RS-LCD


 The RSXXXXD is a Staefa Room Sensor with a LCD digital
 display. It was designed to provide a visual display of
 the room temperature, Standard options Available.

RS-LCD
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 S1Pi


 The S1Pi is a Staefa Smart 1 Proportional interface is a
 direct replacement for the SMPI. It interfaces between
 SM1 controller and zone valve. Optional 0-10V/4-20mA inp

S1Pi
No Optical Isolation No Transformer Isolation Product Stocked
  Cut sheets and applications - Adobe Acrobat

 SIA02K


 The SIA02K is a Signal converter module, that is powered
 from Staefa klimo controller bridge voltage and outputs
 klimo sensor voltage. (See PDF for more information)

SIA02K
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 SIA03A


 The SIA03A was designed to convert, scale, select, sum,
 or average 2 input signals. It has two 24V P.S. options
 (half & fullwave) & optional 24VDC supply for mA loops.

SIA03A
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 SIA04


 The SIA04 is a Signal converter module, that is powered
 from Staefa klimo controller bridge voltage and outputs
 klimo sensor voltage. (See PDF for more information)

SIA04
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 SMVD


 The SMVD was designed to drive Staefas large magnetic
 valves. Its available as a phase cut amplifier or as a
 0-10V/4-20mA signal to phase cut convertor module.

SMVD
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 UIPT


 The UIPT accepts all standard analog, pulse, and phase-
 cut signals and converts them to a 3-15 psi pressure
 output signal. Optional feedback output avaliable.

UIPT
Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

 VPM1


 The VPM1 converts a 0 to 10VDC signal into an 85Hz,
 15VDC pulse width moudulaed signal. It was designed for
 GEs ICM variable speed motors in HVAC applications.

VPM1
No Optical Isolation No Transformer Isolation Product Not Stocked
  Cut sheets and applications - Adobe Acrobat

Training

Our Training
We offer a wide range of HVAC Product and System Operations training courses throughout the year.

View Training

Service

Services we provide
Technical service and repair parts for any phase of your building´s lifecycle.

View all Services

Featured Demo

Our Main Office
Take a look at what we've done to reduce our building energy by almost 50% over its historical average.

View Demo
Atkinson Electronics, Inc.
14 West Vine Street
Salt Lake City, Utah 84107
Tel: 801-261-3600
Fax: 801-261-3796
Toll free: (800) 261-3602
About Us|Contact Info|Site Map

Atkinson Electronics, Inc. © Copyright 2001 - 2010 All Rights Reserved