GSCM GENERATOR START CONTROL MODULE

GSCM GENERATOR START CONTROL MODULE

The GSCM Generator Start Control Module is a field-programmable microprocessor-based generator-starting controller that receives start commands from the 12-volt output from an OutBack FX inverter auxiliary output, a user-supplied switch, an auxiliary relay in an inverter, a voltage controlled relay, a timer or any user-supplied contact closure. It automatically controls a gas/propane or diesel powered generator or pump, and it is totally sealed for harsh environment operation.

The GSCM provides N.O. relay contacts to start the engine and disconnect the starter when a minimum generator frequency ouput is measured. It monitors the generator operation, shutting it down if one of several fault conditions is detected. LEDs are flashed to indicate the cause of the shutdown. Manually resetting the GSCM removes the lockout and allows the generator to restart if called. The GSCM is powered by 12 to 24 volts DC from a battery bank and will start generators for 12 to 48V systems. For 48V systems, the GSCM must be powered by a 24V-or-less tap on the 48V battery bank. The GSCM provides a 30-day exercise function which can be synchronized with a photovoltaic input to only start each 30-day period at the beginning of the solar charge day. The GSCM has a 2-year limited warranty.


Dimensions: 5.5” x 3.3” x 1.5”         

Purchase Online: GSCM Generator Start Control Module

Product Datasheet Application Bulletin:  GSCM Alternator 255HZ Version Application Bulletin:  Outback Inverter Auto Generator Start Using GSCM Application Bulletin:  The GSCM-255 Hz looks for a 0 - 255 Hz signal with AC voltages between 25 & 240 VAC Application Bulletin:  GSCM - Outback Inverter with Kubota GL6500 Generator Application Bulletin:  GSCM - Outback Inverter with Honda EU3000Is Generator Application Bulletin:  GSCM mini - Outback Inverter with Honda EM7000is Generator Application Bulletin:  GSCM mini - Outback Inverter with Honda EU3000Is Generator Application Bulletin:  Outback Inverter with Generator Requiring Higher Current Relays Application Bulletin:  GSCM mini - Outback Inverter with Honda EB6500 Generator Application Bulletin:  GSCM Shutdown On High/Low HZ Fault Condition Application Bulletin:  GSCM - 48 Volt Battery System with Hand/Off/Auto switch Application Bulletin:  Outback Inverter with Winco 6500 Generator Wiring Diagram Application Bulletin:  Outback Inverter with Briggs and Stratton Elite Series Generator
Features and Applications:
   •  Automatic starting, load transfer and shutdown of gas or diesel generators, especially for off-grid uses
   •  Automatic adjustable voltage set-points for generator battery charging applications, 0 to 60 volts DC
   •  Works with 12, 24 or 48V battery systems
   •  Provides fault shutdown for the following conditions: low oil pressure, high temperature, under-speed or over-speed
   •  All sequences have adjustable time periods and are field programmable
   •  30 day exercise with or without load, battery equalize function available
   •  Relay driver for emergency shutdown and 30 day exercise remote indication
   •  12 hour maximum runtime (with override) for automatic starting applications
   •  Totally sealed for harsh environment operation

Wiring Diagram:
GSCM GENERATOR START CONTROL MODULE WIRING

Atkinson Electronics, Inc.
14 West Vine Street
Salt Lake City, Utah 84107
Tel: 801-262-6400
Fax: 801-261-3796
Toll free: (800) 261-3602
Contact Info

Atkinson Electronics, Inc. © Copyright 2001 - 2016 All Rights Reserved