Product Overview
The SMVD is designed to drive 1.25” to 3.25” STAEFA magnetic valves. The universal input section will accept a 0 to 20V phase cut, 4-20mA or 0-10VDC voltage input signal. The mA and DC inputs are non-isolated; however, an isolated mA input is available. See SMVD/MAI. The factory output calibration is 6 - 18V phase cut which STAEFA recommends for linear valve operation. No other output ranges are available on the SMVD due to its application specific design. The output of the SMVD is designed to overcome line losses even when mounted in a panel. It is still recommended that the SMVD may be mounted as close to the valve as possible.
The SMVD/UNI is also available as a 120W.
For more information go to “other details” for the data sheet.
Dimensions: W: 3” x H: .1.5" x D: 3.3"
