Product Overview
The GSCM-mini products are no longer recommended for new installs. Please use the GSCM-Wifi (A0522) instead.
Contact cbdsales@atkinsonel.com for the proper hookup diagram. Please include the generator make & model, inverter brand, & battery bank voltage.
WARNING: Most back up/ utility standby generators are not compatible with remote starting. For further information contact cbdsales@atkinsonel.com.
The Generator Start Control Module-mini (GSCM-mini-*) is a non-programmable microcontroller based generator start controller that is designed to auto start and stop gas, duel fuel or tri-fuel generators. An automatic choke is required.
The GSCM-Mini-60 supports 3- or 4-wire traditional crank-to-start generators. Some generators that run on the GSCM-Mini-60 include:
Onan HGJAx
Onan HGLAA
Onan KV/KVD
Onan 3CR
The GSCM-Mini-O supports 3- or 4-wire traditional crank-to-start diesel generators that require a longer activation on the crank to accommodate internal timing for the glow plugs. These are almost all Onan diesel generators:
Onan HDKCx
Onan HDKAC
Onan HDKBx
Onan MDKBx
The GSCM-Mini-D supports 3- or 4-wire traditional crank-to-start diesel or gas generators that require a short activation on the stop relay to run the glow plugs or the prime . These are also almost all Onan diesel or gas generators made for installation in RVs:
Onan HDKAL
Onan HGxxx with a prime on the stop command
Wrico Diesel
The GSCM-mini-P supports three types of 3 or 4 wire push to start, multiple attempt generators including:
Champion model # 100573
Cummins/Onan model #’s P4500I, P9500DF
Almost all Westinghouse iGen and wGen models
Duromax model # XP13000EH Duel Fuel
The GSCM-mini-I was designed for inverter generators from Honda:
EU7000is
EM6000
etc.
The GSCM-mini-Y was designed for generators from Yamaha requiring a custom feedback cable:
EF4500
EF6300ise
etc.
Dimensions: W: 3.2” x H: 1.2" x D: .875"
