Product Overview
The GSCM-Wifi is no longer available. It has been replaced by the GSCM-A (A0523).
Please contact cbdsales@atkinsonel.com for the proper hookup diagram for your generator.
Please include the generator make & model, inverter brand, & battery bank voltage.
Most Honda EXXXXXIS Series requires a Honda Inverter Cable A0396
Outback 48 Volt inverter systems that do NOT have a dry-contact option will require isolation relay (A0365)
Note: Standby generators will not work with the GSCM-Wifi or GSCM-Mini. Standby generators have their own control circuitry for monitoring utility power.
Also be aware that the GSCM-Wifi does not connect to the internet or other WiFi networks. The wifi signal broadcast by the GSCM-Wifi is only a temporary local network used for setting the configuration of the device.
The Generator Start Control Module-Wifi (GSCM-Wifi) is a fully configurable micro-processor based generator start controller that is designed to auto start and stop gas, diesel, or propane generators.
The GSCM-Wifi is able to broadcast a Wireless 2.4GHz Wifi network that can be connected to with a phone or tablet in order to change the configuration settings.
It supports three types of 3 or 4 wire gas-generator control: momentary, maintained or key ignition. It automatically disconnects the starter when a minimum generator AC Hz output is measured. It has a adjustable crank time and over and under frequency shut down. The GSCM-Wifi is powered by 12 volts DC from the generator battery and can monitor the battery voltage and start the generator to charge its own battery. The GSCM-Wifi uses the generator AC output to know when the generator has stated and is running.
The GSCM-Wifi also includes a third relay contact that can be configured to do one of several functions. Some of the functions available are a glow-plug start timer, acting as a generator power switch, a manual choke control, generator priming control, and a load control(by way of external load transfer switch)
The GSCM is also available in the original 2-Relay version and the 2-relay diesel version, inverter version or the GSCM Rev. C programmable version.
Dimensions: L: 5.5” x W: 3.5" x H: 2.0"
