Product Overview
Contact cbdsales@atkinsonel.com for the proper hookup diagram. Please include the generator make & model, inverter brand, & battery bank voltage.
WARNING: Most back up/ utility standby generators are not compatible with remote starting. For further information contact cbdsales@atkinsonel.com.
Honda EXXXXXIS Series requires a GSCM-mini-i
The Generator Start Control Module-mini (GSCM-mini) is a non-programmable micro-processor based generator start controller that is designed to auto start and stop gas or propane generators.
It supports three types of 3 or 4 wire gas-generator control: momentary, maintained or key ignition. It automatically disconnects the starter when a minimum generator AC Hz output is measured. It has a fixed crank time and over and under frequency shut down. The GSCM-mini is powered by 12 volts DC from the generator battery and can monitor the battery voltage and start the generator to charge its own battery. The GSCM-mini uses the generator AC output to know when the generator has stated and is running. GSCM-mini-o has a 30 second crank rather than a 20 second crank to allow for glow plugs.
The GSCM-mini is also available in a mini diesel version, inverter version or a programmable version.
Europe, Australia & Japan please see GSCM-mini-50Hz.
Dimensions: W: 3.2” x H: 1.2" x D: .875"
