Contact firstname.lastname@example.org for the proper hookup diagram. Please include the generator make & model, inverter brand, & battery bank voltage.
WARNING: Most back up/ utility standby generators are not compatible with remote starting. For further information contact email@example.com.
Honda EXXXXXIS Series requires a GSCM-mini-i
The Generator Start Control Module-mini-Yamaha (GSCM-mini-y) is a non-programmable micro-processor based generator start controller that is designed to auto start and stop gas or propane generators It supports three types of 3 or 4 wire gas-generator control: momentary, maintained or key ignition. It automatically disconnects the starter when a minimum generator AC Hz output is measured. It has a fixed crank time.
The GSCM-mini-y is powered by 12 volts DC from the generator battery and can monitor the battery voltage and start the generator to charge its own battery. The GSCM-mini uses the generator pilot lamp signal to know when the generator has stated and is running.
The GSCM-mini-y will include ONE of the three Yamaha Pilot Lamp Feed Back Cables Listed:
- Yamaha EF3000iSDE
- Yamaha EF6300iSDE
- Yamaha EF7200iSDE
Dimensions: W: 3.2” x H: 1.2" x D: .875"